Overhead Doors, Acclaim Industrial Doors

Acclaim Industrial Doors offer a wide range of made to measure Sectional Overhead Doors. Our overhead sectional doors are constructed from extremely robust materials and can be operated either manually by hand or electrically assisted by electric 3 ph or 1 ph operators complete with starter.

BENEFITS OF INSULATED OVERHEAD DOORS

Guaranteed high thermal performance, avoiding cold bridging compared with traditional roller shutters
Insulated Sectional Overhead Door panels have a thermal performance that is greater than required by Building Regulations
Windows can be installed in single or multiple panels
Panels can be pre-finished in an extensive range of colours and materials
Doors accidentally damaged can be easily repaired using replacement materials and components

PANEL SPECIFICATIONS

The door panel provides the overall Insulated Overhead Door assembly with its main characteristics and therefore the following detailed information is provided to assist when the door performance needs to be explained.

COMPOSITION

The use of quality materials and precise manufacturing controls ensure long service life in normal industrial and commercial applications. All Acclaim Industrial Doors Insulated Door Panels conform to the Building Regulations requirements for Industrial Doors, and the durability of finishes are those specified by our steel suppliers technical specifications department. Outer and Inner Sheet: 0.5mm hot dipped galvanised steel. Both inner and outer sheets are supplied “V” grooved to provide increased lateral strength, and the whole panel is made-up to form a “T+G” joint top and bottom. Core: 39mm thick rigid polyurethane foam, density 40kg/m3. Seal: Low density compressible foam at panel base, and PVC Tape to the panel nose, all factory applied.

THERMAL PERFORMANCE

Sectional door panels provide high levels of insulation. The foam core between the inner and outer steel sheets of the door panel creates effective interruption of cold bridges, thus preventing transmission of heat or cold. See Declaration of Performance for test results and performance data.

Additional Information

OUTER SKIN - The outer skin is finished and coloured to match most contemporary building cladding, the outer skin can be finished in British Steel’s HPS200.
INNER SKIN - The internal liner skin is finished in RAL 9010 white, polyester coated, stucco embossed galvanised steel as standard.
THERMAL BOW - It should be noted that when a door is due to be positioned where it is likely to receive direct sunlight then dark colours should be avoided due to the potential of thermal bow.

The 40mm insulated door panel gives sound reduction of (Rw) 25db. Please note; this is for the panel only, and does not include joints, i.e. a fully installed door.

A range of windows in various sizes can be incorporated in the panel, the standard being 600 x 300mm with radiused corners. Each panel is fitted with pre punched galvanised steel end caps and the top and bottom panels are finished with an aluminium retainer which holds the top and bottom EPDM seals. A range of locking options are available. Wicket doors are available 900 x 2100mm approx. Low Threshold Profile supplied complete with sash lock or push bar.

Overhead Doors

Overhead doors are ideal for areas where there is no sufficient space to fit the box required for a roller shutter and where headroom is limited or restricted. Overhead doors are suitable for a wide range of industrial and commercial environments.

Guaranteed high thermal performance, avoiding cold bridging compared with traditional roller shutters

Insulated Sectional Overhead Door panels have a thermal performance that is greater than required by Building Regulations

Windows can be installed in single or multiple panels

Panels can be pre-finished in an extensive range of colours and materials

Doors accidentally damaged can be easily repaired using replacement materials and components

Additional Information